| ScanTrac is a high performance, reliable, easy to use X-ray inspection system that can detect and eject metal, glass, plastic, or paper containers with metal, glass, rock, and many other dense foreign materials. It can also detect and eject under-fills or over-fills, voids, damaged containers, upside-down containers, missing or extra components, perform check-weighing, etc.
- Easy to install - The ScanTrac Side View System installs directly over your existing conveyor. No costly plant modifications are needed. The unit takes 4- 6 linear feet of conveyor space, depending on the model. Typically, it takes one day to install and set up the system. The ScanTrac does not require lead screws or additional conveyors to separate containers; it can inspect containers back-to-back, a feature unique to the ScanTrac. The ScanTrac Top Down Sytem, with integrated conveyor, takes up as little as 24 inches (610mm) of your conveyor line.
- Easy to use - Operator training takes minutes. Product setup takes minutes. Product changeover takes seconds or none at all.
- Easy to operate - no production stops for calibration are required. Multiple alarms alert to abnormally high reject rates.
- Easy to maintain - Built-in diagnostics automatically monitor all important parameters - from power supplies and x-ray source health all the way down to light bulbs. Trouble reports are sent out immediately by e-mail.
- Easy to support - The ScanTrac Inspection System can be remotely monitored or controlled by customer's personnel in the comfort of their own office and/or by InspX Technical Support.
- Easy to afford - a completely installed ScanTrac System costs less than the installation costs alone, of some other inspection systems. Please contact InspX for a quotation.
- Trustworthy - High sensitivity to contaminants and extremely low False Reject Rate - less than 1:20,000.
- Other features:
- Auxiliary detectors for high/cocked cap, missing cap, missing label, dud detection or other uses.
- Eject verification sensors, redundant ejectors, and blocking gates for high-responsibility applications.
- Multiple ejectors to allow different defects to be ejected to different bins or tracks.
- Production reports by e-mail
- Integration with customers' SPC systems.
- Validation procedures for FDA-regulated customers.
- Experience - InspX has been in the food and beverage inspecting and handling business for over 40 years. We have a complete line of ejectors and other accessories to complement the ScanTrac Digital X-Ray Inspection System. We also have an experienced staff of engineers and field service people to meet your plant's specific needs. Their help is also available via the remote access link.
|
|
