The ScanTrac Fermata System is a 'pipeline' x-ray inspection system designed for inspecting bulk product for foreign materials.
Inspection Orientation: Pipeline
Package / Product Size:
Diameter - Minimum 2-inch (recommended)
Diameter - Maximum 4-inch (recommended)
Detection Capabilities:
Environment: IP65 (IP69K Optional)
Speed: Greater than 300 gallons per minute
Voltage: 117 ~ 15 A or 230 VAC ~ 7 A, 50 or 60 Hz, Single Phase, A/C - 440V
Compressed Air: as required for ejection
High Speed Operation. Fermata’s high speed image acquisition and processing assures a high resolution inspection at speeds in excess of 600 feet per minute. With a four inch diameter pipe this means inspection processing of greater than 300 gallons per minute.
Ease of Installation and Small Footprint By mounting on existing pipeline (2-inch to 4-inch), the cost and space required to install are both minimized. The small footprint created by the ScanTrac main unit allows installation in many restricted locations.
Accuracy at High Speeds The ScanTrac Inspection Systems set new standards for speed and accuracy by performing multiple high-resolution inspections on bulk product while detecting a wide range of contaminants or foreign objects in bulk product including metal, shards of glass, stones, bone, rubber - even low-contrast images such as plastics in powders without compromise at pipeline speeds up to 300 gallons per minute.
Simultaneous Inspections ScanTrac systems can detect contaminants, components and voids while simultaneously determining density, fill level and fill volume.
Versatility ScanTrac systems feature: adjustable X-Ray energy levels, expandable digital arrays, proprietary algorithms and real-time imaging that can be configured for a broad range of applications.
Targeted Rejection Contaminated product is identified and diverted or rejected down-stream.
Intuitive User- Friendliness Rugged and easy-to-use, ScanTrac's intuitive systems feature Multiple Product Memories, On-Line Diagnostics, Auto-Calibration, Step-by-Step Set-Up menu, and Remote Monitoring for unmatched ease of installation, set-up and operation. Relatively inexperienced personnel achieve optimal inspections with minimal training.
Communications Options Operational status can be monitored locally and remotely through high speed Internet connection for continuous support.
Remote Operator Console A remote console option is available for the ScanTrac Fermata. It allows convenient access up to 20 feet (6 meters) from the x-ray system and conveyor.
Click here to view the Remote Operator Console
Operator Display Full color operator display console allows bright display of menu options, and enhances easy to use operation. Images display continuously, and reject images can be retrieved.
NEMA4 / IP65 Enclosure Compact design allows operation in washdown area and within existing packaging lines.